当前位置: 代码迷 >> 综合 >> QT简单软键盘+SYSZUXpinyin修改
  详细解决方案

QT简单软键盘+SYSZUXpinyin修改

热度:44   发布时间:2024-01-17 23:33:01.0

由于项目需要用到QT软键盘,本来PC上QT用的5.4.1版本,但不支持QInputContext。所以用了和开发板一样的4.8.5.

 

1.简单的数字软件盘

 

     在QtEmbedded-4.8.5-arm/examples/tools/inputpanel下面有例子,下面说一下修改;

 

  1).增加退格键,因为键值问题,需要使用quint32,才能生效,把下面的改一下就好;

 myinputpanel.cpp

 

  form.panelButton_backspace->setProperty("buttonValue", QVariant(quint32(Qt::Key_Backspace))); //设置退格键void MyInputPanel::buttonClicked(QWidget *w){quint32 chr = qvariant_cast<quint32>(w->property("buttonValue"));emit characterGenerated(chr);}

 

myinputpanelcontext.cpp

 connect(inputPanel, SIGNAL(characterGenerated(quint32)), this,SLOT(sendCharacter(quint32)));void MyInputPanelContext::sendCharacter(quint32 character)
{QPointer<QWidget> w = focusWidget();if (!w)return;QKeyEvent keyPress(QEvent::KeyPress,(quint32) character, Qt::NoModifier, QString(character));QApplication::sendEvent(w, &keyPress);if (!w)return;QKeyEvent keyRelease(QEvent::KeyRelease,(quint32)character, Qt::NoModifier, QString()); //character.unicode()QApplication::sendEvent(w, &keyRelease);
}

注意把第二次KeyPress,改为KeyRelease,否则退格键会触发2次

 


  2).鼠标单击弹出软件盘

在myinputpanelcontext.h中增加

class MyProxyStyle : public QProxyStyle
{
public:int styleHint(StyleHint hint, const QStyleOption *option = 0, const QWidget *widget = 0, QStyleHintReturn *returnData = 0) const{if ( hint == QStyle::SH_RequestSoftwareInputPanel )return QStyle::RSIP_OnMouseClick;return QProxyStyle::styleHint(hint, option, widget, returnData);}
};


在main函数中增加

a.setStyle(new MyProxyStyle);

 

好了,到这儿我们就拥有一个简单的能输入数字的软键盘


2.SYSZUXpinyin需要修改的地方(移植过程不再赘述)

 

1)乱码

 可以将编码设置为GB2312,或者将字库转码(SYSZUXpinyin/syszux/)

        

iconv -f gb2312 -t utf-8 syszuxpinyin> syszuxpinyin.tmp

vi一下看syszuxpinyin.tmp中文是否正常,然后覆盖掉原来的

 

在main函数中加入:

 

   QTextCodec *codec = QTextCodec::codecForName("UTF-8"); //“UTF-8GB2312”QTextCodec::setCodecForLocale(codec);// QTextCodec::setCodecForCStrings(codec);QTextCodec::setCodecForTr(codec);// QFont font("unifont",6);//a.setFont(font);


注意不要设CStrings,否则输入法打出来的字乱码(原因自行百度)

 

2)清除上次输入的内容

syszuxpinyin.cpp 中发送完信号,把输入法的lineEdit清了

229 void SyszuxPinyin::affirmString()
230 {
231     emit sendPinyin(lineEdit_window->text());
232     lineEdit_window->clear(); //add
233     this->hide();
234 }

 

3)获取当前控件中的内容(同时支持QSpinBox等控件)

      这个是网友做的,他添加了多种控件,让后通过QApplication::focusWidget();来获取当前焦点控件,使用各控件的方法来获取/设置内容(见源码)

 

4)多次点击同一控件能连续触发输入法(不切换焦点) (见源码)

     网上有重载lineEdit的方法,但支持一种控件,多种不同类型的控件难道都去加一套?

     我的想法比较简单,就是输入完内容把当前焦点clearFocus(),这样再次点击就会获取焦点,并调出输入法。

     还有一种想法是虚拟出一个控件,输入完内容setFocus(),

 

由于 QWSServer是专门针对嵌入式的(度娘),所以测试完赶紧先把输入法移了吧

syszuxim.h

#ifndef SYSZUXIM_H
#define SYSZUXIM_H
#include <QWSInputMethod>
#include <QtGui>class SyszuxPinyin;
class SyszuxIM:public QWSInputMethod
{Q_OBJECTpublic:SyszuxIM();~SyszuxIM();void updateHandler(int);QLineEdit *le;QSpinBox *sb;QDoubleSpinBox *dsb;QTextEdit *tee;QComboBox *cb;QTimeEdit *tie;QDateEdit *de;QDateTimeEdit *dte;enum WidgetType{LINEEDIT,SPINBOX,DOUBLESPINBOX,TEXTEDIT,COMBOBOX,TIMEEDIT,DATEEDIT,DATETIMEEDIT};WidgetType type;public slots:void confirmString(QString gemfield);private:        SyszuxPinyin* syszuxpinyin;QWidget *current_focus_widget;void focusin();};
#endif

 

syszuxim.cpp

#include "syszuxim.h"
#include "syszuxpinyin.h"SyszuxIM::SyszuxIM()
{le = new QLineEdit; //added by mesb = new QSpinBox;dsb = new QDoubleSpinBox;tee = new QTextEdit;cb = new QComboBox;tie = new QTimeEdit;de = new QDateEdit;dte = new QDateTimeEdit;syszuxpinyin = new SyszuxPinyin(this);current_focus_widget=new QWidget;current_focus_widget = QApplication::focusWidget(); syszuxpinyin->resize(800,480);
}SyszuxIM::~SyszuxIM()
{syszuxpinyin->deleteLater();
}void SyszuxIM::confirmString(QString gemfield)
{if(type == LINEEDIT){le->setText(gemfield);le->clearFocus();}else if(type == SPINBOX){sb->setValue(gemfield.toInt());sb->clearFocus();}else if(type == DOUBLESPINBOX){dsb->setValue(gemfield.toFloat());dsb->clearFocus();}else if(type == TEXTEDIT){tee->setText(gemfield);tee->clearFocus();}else if(type == COMBOBOX){if(gemfield.isEmpty()){sendCommitString(gemfield);cb->clearFocus();}else{cb->setEditText(gemfield);//可能有问题cb->clearFocus();}}else{sendCommitString(gemfield);}
}void SyszuxIM::updateHandler(int type)
{switch(type){case QWSInputMethod::FocusIn:focusin();break;case QWSInputMethod::FocusOut:syszuxpinyin->hide();break;default:break;}
}void SyszuxIM::focusin()
{QString str;current_focus_widget = QApplication::focusWidget();if(qobject_cast<QLineEdit*>(current_focus_widget)){type = LINEEDIT;le= qobject_cast<QLineEdit*>(current_focus_widget);str = le->text();}else if(qobject_cast<QSpinBox*>(current_focus_widget)){type = SPINBOX;sb = qobject_cast<QSpinBox*>(current_focus_widget);str = tr("%1").arg(sb->value());}else if(qobject_cast<QDoubleSpinBox*>(current_focus_widget)){type = DOUBLESPINBOX;dsb = qobject_cast<QDoubleSpinBox*>(current_focus_widget);str = tr("%1").arg(dsb->value());}else if(qobject_cast<QTextEdit*>(current_focus_widget)){type = TEXTEDIT;tee = qobject_cast<QTextEdit*>(current_focus_widget);str = tee->toPlainText();}else if(qobject_cast<QComboBox*>(current_focus_widget)){type = COMBOBOX;cb = qobject_cast<QComboBox*>(current_focus_widget);str = cb->currentText();str = "";}elsestr = "";syszuxpinyin->show();syszuxpinyin->lineEdit_window->setText(str);
}


 

 

  相关解决方案