当前位置: 代码迷 >> 综合 >> Android如何找到正确的ALSA底层kcontrol接口?
  详细解决方案

Android如何找到正确的ALSA底层kcontrol接口?

热度:59   发布时间:2024-01-19 05:22:16.0

昨天分析了一把snd_kcontrol,可以认为上层应用的确是通过名称标识name来遍历底层的snd_kcontrol链表,从而找到相匹配的kcontrol。见snd_ctl_find_id函数

/*** snd_ctl_find_id - find the control instance with the given id* @card: the card instance* @id: the id to search** Finds the control instance with the given id from the card.** Returns the pointer of the instance if found, or NULL if not.** The caller must down card->controls_rwsem before calling this function* (if the race condition can happen).*/
struct snd_kcontrol *snd_ctl_find_id(struct snd_card *card,struct snd_ctl_elem_id *id)
{struct snd_kcontrol *kctl;if (snd_BUG_ON(!card || !id))return NULL;if (id->numid != 0)return snd_ctl_find_numid(card, id->numid);list_for_each_entry(kctl, &card->controls, list) {if (kctl->id.iface != id->iface)continue;if (kctl->id.device != id->device)continue;if (kctl->id.subdevice != id->subdevice)continue;if (strncmp(kctl->id.name, id->name, sizeof(kctl->id.name)))continue;if (kctl->id.index > id->index)continue;if (kctl->id.index + kctl->count <= id->index)continue;return kctl;}return NULL;
}


今天继续跟踪Android音频系统时,发现无论如何都找不到Android与snd_kcontrol的联结点,无论是name还是numid(alsa_amixer controls打印出来的那个numid,即是内核层snd_kcontrol链表元素的numid)都找不到相关关键字。但是它确实可以进行调节音量等控制。后来我修改内核的Codec驱动,将音量控制的kcontrol.name换成其他字符串,重新编译,Android还是可以进行音量控制。

看起来有点像是通过numid来控制的,《Android音频HAL移植》一文有提到:“设备的切换就需要和驱动联调。例如,目前earpiece的id为10,那么就可以通过ALSA的amixer设置earpiece的开和关,以及大小。而id的值就需要做驱动的同事提供。”但是还不能就此肯定。目前也没有找到保存这些值的脚本文件。


继续以上问题,我在调节音量时,打印Codec寄存器的值,发现volume寄存器的值根本不会发生变化,但是音量确确实实是变化的。那时就在怀疑我们Android的音量调节不是通过硬件来实现的,而是有自身的sw mixer机制。晚上和Vic一起吃饭时,聊起这个,肯定了我的猜测。

status_t AudioFlinger::setMasterVolume(float value)
{// check calling permissionsif (!settingsAllowed()) {return PERMISSION_DENIED;}// when hw supports master volume, don't scale in sw mixerAutoMutex lock(mHardwareLock);mHardwareStatus = AUDIO_HW_SET_MASTER_VOLUME;if (mAudioHardware->setMasterVolume(value) == NO_ERROR) {value = 1.0f;}mHardwareStatus = AUDIO_HW_IDLE;mMasterVolume = value;for (uint32_t i = 0; i < mPlaybackThreads.size(); i++)mPlaybackThreads.valueAt(i)->setMasterVolume(value);return NO_ERROR;
}
应该是Android允许开发者在HAL层实现hw mixer,当AudioFlinger探测到存在hw mixer时,则调用mAudioHardware->setMasterVolume()对volume寄存器进行设置,也不会对volume值进行scale。至于sw mixer如何使用scale值的,我没有深入探究。

以后实现hw mixer看看(反正到时也要实现EQ)效果,现在这个音量设置不是线性的,用硬件控制应该更好一点。


PS:标题就不用管它了,默认下Android根本不去找底层的kcontrol接口,而是使用自身的sw mixer。

  相关解决方案