一、场景：Centos6.5 克隆之后，重启网卡报错 No suitable device found: no device found for connection 'System eth0'.
查看网卡： ifconfig (克隆过来的网卡由 eth0变为了eth1)
[root@bogon ~]# ifconfig
eth1 Link encap:Ethernet HWaddr 00:0C:29:E8:A7:9A inet addr:192.168.0.107 Bcast:192.168.0.255 Mask:255.255.255.0inet6 addr: fe80::20c:29ff:fee8:a79a/64 Scope:LinkUP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1RX packets:87 errors:0 dropped:0 overruns:0 frame:0TX packets:54 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000 RX bytes:9825 (9.5 KiB) TX bytes:7458 (7.2 KiB)lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0inet6 addr: ::1/128 Scope:HostUP LOOPBACK RUNNING MTU:16436 Metric:1RX packets:4 errors:0 dropped:0 overruns:0 frame:0TX packets:4 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:0
二、解决方案：
1、删除旧虚拟机的网络配置文件，重启服务器：
rm -f /etc/udev/rules.d/70-persistent-net.rules
reboot
2、若修改为静态ip地址，需要修改 eth0网卡配置文件（Mac地址用ifconfig命令查出来的 Mac）：
vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="static"
HWADDR="00:0C:29:E8:A7:9A"
IPADDR=192.168.0.121
NETMASK=255.255.255.0
GATEWAY=192.168.0.1
IPV6INIT="yes"NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="f77f64a8-e244-4cc1-bcb9-075c513e934f"
3、重启服务： service network restart
