WinCE6.0 上 快速启动
参考了几篇文章：
http://blog.chinaunix.net/uid-8087110-id-1989057.html
http://blog.csdn.net/hao507/article/details/4972110
目前 能够编译出 xip.bin 和 XIPKERNEL.bin
注册表也做出了更改
现象是 内核启动到显示LOGO ，之后就启动不起来了，调试信息显示到
NK Image Loaded
Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 25 2009 at 11:04:23
之后就没反应了
哪位大侠帮分析一下原因.
config,bib添加了如下
XIPKERNEL 0x80002000 0x00402000 RAMIMAGE
CHAIN 0x83102000 0x00102000 RESERVED
NK 0x80402000 0x02702000 NANDIMAGE
。。。。
nk.exe $(_FLATRELEASEDIR)\oal.exe XIPKERNEL SHZ
kernel.dll $(_FLATRELEASEDIR)\kernel.dll XIPKERNEL SHZ
coredll.dll $(_FLATRELEASEDIR)\coredll.dll XIPKERNEL SH
oalioctl.dll $(_FLATRELEASEDIR)\oalioctl.dll XIPKERNEL SHK
k.coredll.dll $(_FLATRELEASEDIR)\k.coredll.dll XIPKERNEL SHMK
filesys.dll $(_FLATRELEASEDIR)\filesys.dll XIPKERNEL SHK
fsdmgr.dll $(_FLATRELEASEDIR)\fsdmgr.dll XIPKERNEL SHMK
mspart.dll $(_FLATRELEASEDIR)\mspart.dll XIPKERNEL SHK
romfsd.dll $(_FLATRELEASEDIR)\romfsd.dll XIPKERNEL SHK
binfs.dll $(_FLATRELEASEDIR)\binfs.dll XIPKERNEL SHK
fpcrt.dll $(_FLATRELEASEDIR)\fpcrt.dll XIPKERNEL SH
k.fpcrt.dll $(_FLATRELEASEDIR)\fpcrt.dll XIPKERNEL SHMK
ceddk.dll $(_FLATRELEASEDIR)\ceddk.dll XIPKERNEL SHQ
device.dll $(_FLATRELEASEDIR)\device.dll XIPKERNEL SHMK
udevice.exe $(_FLATRELEASEDIR)\udevice.exe XIPKERNEL SHM
devmgr.dll $(_FLATRELEASEDIR)\devmgr.dll XIPKERNEL SHMK
regenum.dll $(_FLATRELEASEDIR)\regenum.dll XIPKERNEL SHK
busenum.dll $(_FLATRELEASEDIR)\busenum.dll XIPKERNEL SHK
pm.dll $(_FLATRELEASEDIR)\pm.dll XIPKERNEL SHMK
omap_nand.dll $(_FLATRELEASEDIR)\omap_nand.dll XIPKERNEL SHK
; ebootnand.dll $(_FLATRELEASEDIR)\ebootnand.dll XIPKERNEL SHK
kern.dll $(_FLATRELEASEDIR)\kern.dll XIPKERNEL SHK
netmui.dll $(_FLATRELEASEDIR)\netmui.dll XIPKERNEL SHK
omap_gpio.dll $(_FLATRELEASEDIR)\omap_gpio.dll XIPKERNEL SHK