以下为logo 信息
插上usb，移动一下，然后拔下的所有信息
+USBD:ResetPipe为移动鼠标的信息，屏幕的上鼠标无反应
致敬 ---- ll124884135
- C/C++ code
CHub(External tier 1)::HubStatusChangeThread - port 1, change = 0x0001, status = 0x0301 hubStatus PortEnableChange = 0hubStatus PortEnabled = 0hubStatus PortConnected = 1hubStatus ForceDetach = 0hubStatus.change.port.ConnectStatusChange = 1CHub(External tier 1)::HubStatusChangeThread - device attached on port 1 +CHub(External tier 1)::AttachDevice - port = 1, fIsLowSpeed = 1 AttachDevice: with CHub(0xd48f5030) ResetEventCHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_LEAVE_ADDRESS0, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SETUP_CONFIGURATION_DESCRIPTOR_ARRAY, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_CONFIG_DESCRIPTOR, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_CONFIG_DESCRIPTOR,failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE, failures = 0 CHub(External tier 1)::AttachDevice - Select Configuration 0 on DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE step Config Power = 100 mACHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_CONFIG, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_CREATE_NEW_FUNCTION, failures = 0 UsbHost : New Function [address(3) / layer(1)]CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY, failures = 0 CHub(External tier 1)::AttachDevice - status = DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE, failures = 0 OSAXST1: >>> Loading Module 'usbhid.dll' (0x89269CC0) at address 0xC1020000-0xC1037000 in Process 'NK.EXE' (0x8462CAA0)OSAXST1: >>> Loading Module 'hidparse.dll' (0x89269E08) at address 0xC10E0000-0xC10F5000 in Process 'NK.EXE' (0x8462CAA0)DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\USB\ClientDrivers\Hid\Instance\Prefix) returned 2DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\USB\ClientDrivers\Hid\Instance\BusPrefix) returned 2DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\USB\ClientDrivers\Hid\Hid_Class\BusPrefix) returned 2+USBD:OpenPipe, EP: 0x81, MaxPkt: 5, Type: Interrupt-USBD:OpenPipe success, hPipe = D02AC9B0 [NOTIFY] HandleSystemEvent 7 /ADD HID1:HidParse: 'Preparing to Allocate memory HidParse: 'Top Level Collection 1 found HidParse: 'Enter Link Collection HidParse: 'Exit Link Collection HidParse: 'Collection 1 exit HidParse: 'Starting Parsing Pass HidParse: 'Parse Collection 1 HidParse: 'Main Offset:8 HidParse: 'Main Offset:b HidParse: 'Main Offset:10 HidParse: 'Main Offset:28 HidParse: 'X Parse Collection 1 OSAXST1: >>> Loading Module 'mouhid.dll' (0x87817780) at address 0xC1120000-0xC1127000 in Process 'NK.EXE' (0x8462CAA0)-CHub(External tier 1)::AttachDevice - port = 1, fIsLowSpeed = 1, address = 3 +USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipe+USBD:ResetPipeCHub(External tier 1)::HubStatusChangeThread - port 1, change = 0x0001, status = 0x0100 hubStatus PortEnableChange = 0hubStatus PortEnabled = 0hubStatus PortConnected = 0hubStatus ForceDetach = 0hubStatus.change.port.ConnectStatusChange = 1CHub(External tier 1)::HubStatusChangeThread - device detached on port 1 +CHub(External tier 1)::DetachDevice - port = 1 CHub(External tier 1)::DetachDevice - created worker thread to handle device detach +CHub::DetachDownstreamDeviceThread +CFunction(tier 2)::HandleDetach USBHost : Detach Function [address(3) / layer (1)]+USBD:ClosePipe, hPipe: 0xD4D09890-USBD:ClosePipe+USBD:ClosePipe, hPipe: 0xD02AC9B0-USBD:ClosePipeOSAXST1: <<< Unloading Module 'mouhid.dll' (0x87817780) at address 0xC1120000-0xC1127000 in Process 'NK.EXE' (0x8462CAA0)-CHub(External tier 1)::DetachDevice - port = 1 StartInterruptTransfer: IssueInterruptTransfer failedOSAXST1: <<< Unloading Module 'usbhid.dll' (0x89269CC0) at address 0xC1020000-0xC1037000 in Process 'NK.EXE' (0x8462CAA0)OSAXST1: <<< Unloading Module 'hidparse.dll' (0x89269E08) at address 0xC10E0000-0xC10F5000 in Process 'NK.EXE' (0x8462CAA0)[NOTIFY] HandleSystemEvent 7 /REMOVE HID1:-CFunction(tier 2)::HandleDetach -CHub::DetachDownstreamDeviceThread