----------------------------------------------------------------------
Esc-2_Continue Esc-6_Help
提示你是否采用IPv6技术？本例中，不采用IPv6技术，按F2键继续安装；
- Set the Default Route for bge0 -----------------------------------------------
To specify the default route, you can let the software try to detect one
upon reboot, you can specify the IP address of the router, or you can choose
None. Choose None if you do not have a router on your subnet.
> To make a selection, use the arrow keys to select your choice and press
Return to mark it [X].
Default Route for bge0
--------------------------
[ ] Detect one upon reboot
[X] Specify one
[ ] None
----------------------------------------------------------------------
Esc-2_Continue Esc-6_Help
提示你设置缺省网关，本例中，我们选择Specify one，设置缺省网关，使用上下
箭头，移动光标到[ ] Specify one位置后，按空格键选中，然后按F2键继续安装；
- Default Route IP Address for bge0 ----------------------------------
Enter the IP address of the default route. This entry will be placed in the
/etc/defaultrouter file and will be the default route after you reboot
(example 129.146.89.225).
Router IP Address for bge0 12.3.102.250
----------------------------------------------------------------------
Esc-2_Continue Esc-6_Help
提示你输入主机的缺省网关，本例中，输入12.3.102.250后，按F2键继续安装；
- Confirm Information for bge0 -------------------------------------------------
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Networked: Yes
Use DHCP: No
Host name: N2000NGN2
IP address: 12.3.102.23
System part of a subnet: Yes
Netmask: 255.255.255.0
Enable IPv6: No
Default Route: Specify one
Router IP Address: 12.3.102.250
----------------------------------------------------------------------
Esc-2_Continue Esc-4_Change Esc-6_Help
提示你确认上面输入的信息，如果上述的输入信息有错，可以按F4键后重新输入；如果正确，
按F2键后继续安装；
- Configure Security Policy: ---------------------------------------------------
Specify Yes if the system will use the Kerberos security mechanism.
Specify No if this system will use standard UNIX security.
Configure Kerberos Security
---------------------------
[ ] Yes
[X] No
----------------------------------------------------------------------
Esc-2_Continue Esc-6_Help
配置安全策略，本例中，我们选择No,因此按F2键继续安装；
- Confirm Information ----------------------------------------------------------
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Configure Kerberos Security: No
---------------------------------------------------------------------
Esc-2_Continue Esc-4_Change Esc-6_Help
确认刚才输入的信息，如果刚才输入的信息有错，按Esc-4键重新输入；如果正确，按F2键继续安装；