Multiple-bin 文件如何烧写到Nand Flash里面？
如何烧写XIPKERNEL.bin, NK.bin, chain.bin, 当然还有个chain.lst, 还有个XIP.bin。但是不知道该如何烧写这几个文件？还有怎么样在nand flash上面创建BinFS分区？
看网上帖子上说直接烧写chain.lst. 可是不知道该如何烧写。Eboot菜单里面没有这一项啊,下面是Eboot菜单：
Initiating image launch in 1 seconds.
Ethernet Boot Loader Configuration:
0) IP address: 192.168.1.6
1) Subnet mask: 255.255.255.0
2) DHCP: Disabled
3) Boot delay: 1 seconds
4) Reset to factory default configuration
5) Startup image: LAUNCH EXISTING
6) Program disk image into SmartMedia card: Enabled
7) Program DM9000 MAC address (10:23:45:67:89:AB)
8) Kernel Debugger: ENABLED
9) Format Boot Media for BinFS
B) Mark Bad Block at Reserved Block
D) Download image now(USE TFTP)
E) Erase Reserved Block
F) Low-level format the Smart Media card
L) LAUNCH existing Boot Media image
R) Read Configuration
U) Download image now(USE USB)
W) Write Configuration Right Now
谢谢指教！
------解决方案--------------------------------------------------------
用U就可以通过USB升级那些bin，有没有用到chain.lst要看代码是如何实现的